Quality dust collector filter bags manufacturer.Make your filter bag last longer

yelangseo390

Zhejiang Grace Envirotech Co. ltd (https://www.dustfilter-bag.com/s ... fractory-plant.html).Our commitments is to enhance and optimize the performance of dust filters for particulate air pollution control.Free consultance for right and cost effective filter bag choosing.Contact number: 86-571-86058862-8008.
The “bag leakage” of the dust collector filter bag refers to the situation where dust passes through the filter bag but is not captured, which can lead to a decrease in the treatment efficiency of the dust collector. The following are several common bag leakage detection methods:
Smoke method: Inject smoke into the inlet of the dust collector and observe if there is any smoke leakage from the outlet of the dust collector. This method is simple and intuitive, but it should be noted that the injected smoke should not cause harm to the environment and human health.
Vibration method: By vibrating the filter bag, the accumulated dust inside the bag is dropped, and then the filter bag is checked for perforation and loopholes through light transmission. This method is suitable for detecting when the dust collector is stopped.
Sound wave method: Use high-frequency sound waves to vibrate the filter bag, causing the dust inside the filter bag to fall off. At the same time, use detection instruments to detect the signal changes after the sound waves pass through the filter bag, thereby determining the leakage situation of the filter bag.
Wet method: Spray water mist on the surface of the filter bag, and use the principle of increasing resistance when the filter bag adsorbs water mist to determine the leakage of the filter bag.