Grace Envirotech Co.Quality dust collector filter bags manufacture. Rich variety

yelangseo390

Zhejiang Grace Envirotech Co. ltd (https://www.dustfilter-bag.com/s ... nsile-strength.html).Grace Filter ,stands for high efficiency filtration solutions and expertise service for filtration industry. Contact number: 86-571-86058862-8008.
How to clean the filter bag of the dust collector in the asphalt mixing station.
The filter bag of the dust collector in the asphalt mixing station is an important equipment used to collect dust particles generated in the asphalt mixing station. As the usage time increases, dust will inevitably accumulate on the surface of the filter bag, leading to a decrease in the efficiency of the dust collector. Therefore, regular cleaning of the filter bag is the key to maintaining the normal operation of the dust collector. So, how should we clean the filter bag of the dust collector in the asphalt mixing station?
We need to prepare tools and materials for cleaning the filter bag. Commonly used cleaning tools include water guns, nozzles, brushes, vacuum cleaners, etc. When cleaning filter bags, we need to use cleaning agents to remove stubborn stains, usually using neutral cleaning agents. In addition, it is necessary to prepare some clean cloth or paper for wiping and absorbing water.
Before starting cleaning, we need to power off the dust collector and cut off the gas and power supply. This is to ensure safety and avoid accidental contamination of the filter bag. Next, we can use tools such as vacuum cleaners or brushes to remove impurities and large particles from the surface of the filter bag.
After removing surface dirt, we can start a more thorough cleaning. Firstly, we can use tools such as a water gun or nozzle to thoroughly wet the filter bag, which can help soften the remaining oil and dust on the filter bag. Then, we can use a brush to gently brush the surface of the filter bag to thoroughly remove the dirt. Remember to avoid using a hard bristled brush or high-pressure water gun to avoid damage to the filter bag.
During the cleaning process, we can use an appropriate amount of cleaning agent based on the material of the filter bag and the recommended cleaning agent. Dissolve the cleaning agent in an appropriate amount of water, and then evenly spray along the fiber direction of the filter bag. After soaking the filter bag with cleaning agent for a period of time, rinse the filter bag thoroughly with clean water to ensure that the residual cleaning agent on the filter bag is completely removed.
We need to air dry the filter bag naturally. During the air drying process, we can use clean cloth or paper to absorb the moisture on the filter bag. Try to avoid direct exposure to sunlight or high temperature blowing, as this may cause deformation or damage to the filter bag.