China dust collector filter bags manufacturer.Grace Envirotech Co.Trustworthy.

yelangseo390

Zhejiang Grace Envirotech Co. ltd (https://www.dustfilter-bag.com/s ... le-felt-filter.html),with the famouse brand "ECOGRACE".Our commitments is to enhance and optimize the performance of dust filters for particulate air pollution control. Free consultance for right and cost effective filter bag choosing.Contact number: 86-571-86058862-8008.
PTFE dust removal bags are usually materials with anti adhesion properties, which have good chemical resistance and high temperature resistance. In general, water can be used for simple cleaning and flushing, but the following points need to be noted:
Temperature limit: PTFE dust removal bags have a high temperature resistance range, but should avoid using overheated water during cleaning to avoid damage to the bags. It is recommended to use room temperature or slightly warm water for cleaning.
Selection of cleaning agents: Neutral cleaning agents can be selected to assist in cleaning, avoiding the use of acidic or alkaline cleaning agents to avoid adverse effects on PTFE materials.
Cleaning method: You can gently rinse the surface of the PTFE dust removal bag with water, and you can use a soft bristle brush to gently brush or tap the dust removal bag to help remove attached particles. It is not recommended to use a high-pressure water gun or vigorously brush to avoid damage to the cloth bag.
Drying treatment: After cleaning, the PTFE dust removal bag should be placed in a well ventilated area for natural drying, avoiding direct sunlight or using hot air drying to avoid damage to the bag.
It should be noted that PTFE dust removal bags may be affected by chemical substances in some situations, such as certain strong acid or alkali environments. In this case, corresponding cleaning and treatment methods should be followed. In addition, for special cleaning needs, it is recommended to consult relevant professionals or suppliers for advice and guidance.